Comgrow T300 3D Printer From Sovol

$269.00

$449.00

T300.jpg__PID:af1a1ead-f7f2-4ada-a440-239fc8a47249

All Metal Design

The frame and the majority of the T300 3D printer's components are crafted from metal not only to achieve the desired durability and sturdiness in a printer but also to express our pursuit of professionalism in printing.

All-Metal Hotend

Upgraded All-in-One hotend effectively reduces nozzle leakage risk, extends nozzle lifespan, and simplifies maintenance.

Super Rapid Heating

T300 Reduces heating time by 70% compared to other 3D Printer.

Double-Sided PEI Plate

T300 features a durable double-sided PEI sheet, saving you time and money on replacements. It offers strong magnetism and excellent adhesion, making model removal effortless by hand.

Operate Klipper on a 4.3" Touchscreen

Built-in Klipper eliminates redundant setup and extra hardware needs. Less hassle, more fun.

Rapid Filament Cooling

A 5025 high-speed fan spinning at 8500 rpm provides strong airflow, combined with a circular duct piece, concentrating the air better around the extruded filament, and enhancing cooling efficiency.

30s Heating

Long minutes of heating time are a thing of the past; with the T300, there's less waiting time and more printing fun.

Reliable Filament Extrusion

The T300 features a 6.5:1 gear ratio for more precise material control, allowing for more accurate printing of flexible materials and stronger dual-gear extrusion grip.

81-point Auto Leveling

Auto-leveling ensures the flatness of the heated bed, allowing for a perfect first layer without effort. The build plate automatically heats up before auto-leveling to match the actual printing flatness.

Efficient Cooling

Equipped with three 3010 fans for effective material extrusion cooling.

WiFi Connectivity

Control the printer remotely using WiFi transmission for seamless operation.

Controllable LED Lighting

The hotend is equipped with LED lights for monitoring prints even in low-light conditions.

Works Printed By T500

Product specification

Build Volume

300*300*300mm³

Max Printing Speed

600mm/s

Max Acceleration

12000mm/s²

Power Loss Recover

Yes

Leveling

Auto leveing (Inductive sensor)

Input Shaping

Yes

Screen

4.3 Inch touchscreen

Nozzle Diameter

0.4mm(include), 0.2mm, 0.6mm, 0.8mm

Nozzle Temperature

≤300℃（572℉）

Hotbed Temperature

≤100℃(212℉)

I`ve got my T300 for round about 270€ and I love it, I think I couldn`t get a better machine for the money. I don`t want to repeat the features from above but for the small buck, it`s really a lot good stuff and the frame is nice, heavy and very stable.
Btw, you don`t need that fat image file to update to 1.52, all you need is the folder on top and the screen file from the bottom ;)
But ok, nothing is perfect, so after z-alignment the right side is 2mm to low, rised it with the wheel on top of the lead scew till the hightmap is perfectly leveled, wrote down the clicks for the next time and I`m are good to go. The bed is too hight in the middle, I've used some shims first, but that's not perfect and the shims are really hard to set in place, ordered some of these orange silicon spacers to use them instead of the original plastic spacers and now my bed is nicely flat at all.
For the small buck I feel a bit like I`ve stolen it and even for the normal price it would be a really good machine, the hardware with it`s linear rails, the speed, high flow, hight temperature. You will need a good CoreXY to top it. OK, bamboo lab with it`s sensorless bed leveling and mulicolor / multifilament ability and comunity is another number, but for more money and only in this points, without these points, the T300 would win thhe race.

T300 printer

Seems to be a well constructed printer. Interface screen is different than other Sovol printers, so that is a new learning experience. Been using it for the past week now, and have seen my prints reduce from 22hrs down to 6, so that's a bonus. Could possibly get them lower with some tweaking, but the quality I am getting at the moment I am very happy with. Overall I am happy with my purchase.

The T300 is well finished

The T300 is a very good mechanic with linear rails with a very high precision of care and quality. I have made different impressions with success, it's perfect!
Regrets the leveling of the BED would be easier with adjustment wheels because it is curved in the center. The wheels allow to raise the edges to have a better corrective flatness.
The motherboard fan emits moans at times!
The firmware update 1.52 requires a large file of 6.3 GB to download it's too annoying!
It's very good overall thank you SOVOL
Francis

love T300

Sleek Design and stable printing

Prints fast

Had some issues in the beginning but they where nothing major then other printers. it prints fast, it reminds me of a bamboo labs printer..The interface is a learning curve but I got it. Easy to build took me 20 to build. leveling is still using paper a minor complaint on my part. And half the price is nice.

1 2

Comgrow T300 3D Printer

Product specification

You may also like

Customer Reviews