How to flash firmware for SV02 touch screen.

How to flash firmware for SV02 touch screen

1.New SD card must to be format to the one that can be recognized by the screen.

Start=>> running=>> Input command to enter DOS system(win7 system, please input cmd), input format/q g:/fs:fat32/a:4096.

g is the disk number of your SD card. Please noted that right click to format is invalid; SD card capacity must within 2-16G.

2.Then Put the File I send into the SD card, turn on the printer, and it will flash by itself.

3.Power off , remove the SD card and restart.

Будьте первым комментировать

Все комментарии проходят модерацию перед публикацией