How to level the bed on Sovol SV01 Pro 3D Printer

Turn the four leveling nuts at the four corners counterclockwise to the tightest.
Turn on the printer and then click Leveling on the touchscreen.
Level the four corners by clicking AUX Leveling on the touchscreen.
Click every corner in turn for leveling, the extruder will move to the top of the selected corner.
Insert a piece of A4 paper between the extruder and the hotbed.(other paper with the same thickness as A4 paper is also ok) Keep dragging the paper and turning the leveling nut at the bottom to adjust the distance between the nozzle and the heated bed
All four corners need to be leveled.
It is recommended to repeat the whole process 2 to 3 times above for confirmation. Because when one corner changes, the other three corners will have small changes too.
Click Save on the display after adjustment.
At this time, there is a certain distance between the nozzle and the hot bed.
According to the previous method of paper dragging, click -Z and +Z to move the nozzle up and down to adjust the distance until it is appropriate, and then click Save
After clicking Save, the cr touch will detect again. At this time, the distance between the nozzle and the hot bed is the distance just adjusted.
Click Auto Leveling, the cr touch will perform 4X4 detection on the hot bed.
You can view the data after detection which reflects the level of the hot bed.The smaller the gap between each data, the better. The best status will be that the gap between every two points is no more than 0.2.
During the printing, you can click the position marked on the display screen in this video to enter the adjustment interface, where you can adjust the height of the nozzle by adjusting -Z and +Z in real time.


카지노사이트 카지노사이트 바카라사이트 온라인카지노 온라인바카라 온라인슬롯사이트 카지노사이트게임 카지노사이트검증 카지노사이트추천 안전카지노사이트 안전카지노사이트도메인 안전한 카지노사이트 추천 바카라사이트게임 바카라사이트검증 바카라사이트추천 안전바카라사이트 안전바카라사이트도 안전한 바카라사이트

아시안커넥트 해외스포츠배팅사이트_ 아시안커넥트_ 스보벳_*/*/


Wow, happy to see this awesome post. I hope this think help any newbie for their awesome work. By the way thanks for share this awesomeness from Feel free to visit my website ! 먹튀 검증 순위 안전 카지노 코인 카지노 안전 토토 사이트 먹튀 검증 커뮤니티

안전 토토사이트 추천 SPORTSTOTO7.COM